€50.49
| Weight | 0.50 kg |
|---|---|
| oldid | |
| oldurl | |
| oldurl_en | |
| oldurl_gr | |
| oldurl_ro |
1. The device is equipped with a folding plug and can be connected directly to a socket. When not in use, the plug can be retracted.
2. Negative ion mode: While the power is on, press the on / off button to start the device to enter the negative ion mode, the blue lamp lights up.
3. Single Ozone + Negative Ion Mode: With Negative Ion Mode (2) activated, press the ON / OFF button again to activate Single Ozone + Negative Ion mode, the red light comes on. In this mode, the device emits ozone for 30 minutes and then shuts off automatically.
4. Ozone + Negative Ion Mode: With Single Ozone + Negative Ion mode (3) activated, press the ON / OFF button again to bring the device to Ozone + Negative Ion mode and the red light will blink. In this mode, the ozone function works intermittently - after every 25 minutes work stops for 10 minutes and then repeats the cycle.
5. Press the on / off button briefly to stop the device while it is in Continuous Ozone + Negative Ion Mode.
1. During the ozone sterilization process and within 30 minutes of shutting down the ozone, it is strictly forbidden to remain in the room or space where the device is located, otherwise it may cause physical harm.
2. The user must strictly comply with point 1; the company assumes no liability in the event of injury to humans and animals caused by improper use of the device by the user.
3. After using this device for ozone sterilization or formaldehyde removal, ozone can itself decompose into oxygen without residues.
4. When plugging and unplugging the power plug, make sure your hands are dry. Do not operate the device with wet hands to avoid the risk of electric shock.
5. When working in a humid environment, such as a bathroom or kitchen, make sure you do not spray water on the unit to avoid damaging it.
6. The device is equipped with a high-voltage module that generates negative ions. Non-professionals should not disassemble or repair it themselves. If necessary, please contact us for support.
7. The device generates negative ions during operation. Negative ions have a strong ability to adsorb and sediment dust. Therefore, after some time of use, black dust may accumulate around the device. Please clean periodically.
8. The device is designed to operate with a wide range of input voltages and can be used directly in most countries around the world.
